Setup Guide

Every display in our collection is engineered around a secure mechanical slide-and-lock system. Follow these simple steps to ensure a clean, permanent, and rock-solid wall installation.

WHAT'S IN THE BOX

All our display mounts come with a hardware kit, containing:

  • Two PZ2 screws 4x40 mm
  • Two Fischer plugs 6x30 mm
  • A drill template sticker

TOOLS YOU WILL NEED

  • Drill with a 6 mm drill bit
  • Cross-head screwdriver (or drill bit)
  • Spirit level (or smartphone leveling app)

INSTALLATION STEPS

Step 01: Position & mark

  • Determine your desired display height on the wall.
  • Place the included drill template sticker on the wall at your chosen spot.
  • Use a spirit level to ensure the sticker is horizontally aligned, then press it firmly in place.

Step 02: Drill & insert plugs

  • Drill straight through the designated guide marks on the sticker using a 6 mm drill bit.
  • Peel the template sticker off the wall and discard.
  • Insert the universal wall plugs flush into the drilled holes until they sit level with the wall surface.

Step 03: Fasten & micro-adjust the wall plate

  • Position the wall plate over the drilled holes (ensure it is facing the correct way).
  • Insert and loosely tighten the screws.
  • The wall dock is engineered with slotted mounting channels. This allows you to slide, shift, or rotate the plate slightly to compensate for minor drilling deviations before locking it down.
  • Check level one final time, then tighten both screws securely until the dock sits completely flat and rigid against the wall.

Step 04: Slide & lock

  • Align your display mount with the top of the wall plate.
  • Slide the mount downward until it smoothly docks into place.

Step 05: Display your item

  • Place your item onto the display mount.
  • Step back and enjoy your clean, floating wall display.

QUICK-SWAP & MAINTENANCE

  • Swapping Items: To change or rotate your collection, simply slide the display mount upward out of the wall dock. The base stays permanently secured to your wall—no tools or re-drilling required.
  • Cleaning: Wipe clean with a soft, dry microfibre cloth. Avoid harsh chemical cleaners or abrasive scouring pads.

NEED ASSISTANCE?

Have a question about your specific wall type or installation? Contact our lab directly at info@nvisiblelab.com and we'll gladly help you out.